8" (200mm) rise with a 1" (25mm) clamping area for the handle bar.

Aluminum that has been CNC-machined and anodized black. These isolated risers are placed using the included billet bushings and are intended to be solid-mounted to the top triple tree. This results in a considerably more stiff bar configuration, improving control and maximizing the utilization of your bike's brakes and suspension systems. The rubber bushings are moved just below the handlebar for vibration reduction. They are positioned inside the riser's middle there. The amount of undesired movement at the bushings is significantly reduced thanks to the exclusive use of these rubber isolators. You will feel the bar much more solidly as a result, which will increase your confidence in the handling of your bike.

The hard-mounted riser legs and the new rubber isolators make a noticeable difference right immediately. - far better bar feel and far less vibration than rigid installed risers. - CNC machined billet aluminum with black anodizing - The bottom clamp contains a hole for covert wiring. - Standard OEM H-D fitting is 3.5" center to center. - Bushing life is extended, and upkeep is decreased - The riser body's wire opening in the middle enables simple installation and neat wiring.

Note : The mount (either 984606 Kraus T-Bar Clamp or 984620 Isolated Top Gauge Mount with the 984605 3" Extension for optimal adjustment) must be added separately if you purchase the 984604 RG Billet Gauge Bezel or the 984618 Softail Digital Gauge Bezel with your risers.

Note : that Kraus Isolated Risers are made with universal fitting in mind. Depending on the application, some change may be necessary. Models with integrated bar clamps on the triple tree top clamp are NOT compatible with this product.

Note : The Kraus Raptor or T-Rex Pullback Plates on bagger applications ARE NOT COMPATIBLE with the 5" version for the Kickback option (= Kickback risers without legs). Kraus Isolated Risers are constructed in a modular manner.

Note : If you wish to run a shorter or taller rise later on, you can run them without legs or change the risers' legs for optionally available lengths. There are four different lengths between 3.5" (89mm) and 9.5" (241mm) tall; see "optional Isolated Riser legs."

Fits: > 84-23 HD