No se encontraron productos...
No se encontraron productos...
Product description:
With the speedo sensor holder, you can inconspicuously mount the speedo sensors of the Motoscope speedometer.
The elegant design of the holder embeds perfectly into the overall look of your custom motorcycle. Thanks to the well thought-out wire routing, you can quickly lead the sensor wire to your speedometer, leaving it out of view.
Details:
Assembly:
Plug and Play. First, you mount your Motoscope speedo sensor (included in the delivery of each speedometer by Motogadget) with the speedo sensor holder. Now, the lower screw of the brake calliper is released and retightened with the speedo sensor holder.
The magnet (included in the delivery of each speedometer by Motogadget) is glued, aligned to one of the screws of the brake discs. “Loctite 648” is recommended as glue.
Then, the front wheel is turned carefully until the magnet and the sensor are at the same height. Now adjust the position of the sensor using the two nuts so that the distance between the magnet and the sensor is approx. 2 mm. After checking the distance and the freedom of movement of the wheel, the speedo sensor is screwed on firmly with the holder.