Nessun prodotto trovato...
Nessun prodotto trovato...
Electronic box version G with handlebar adapter.
The G-Box is available with 1 handlebar adapter (G), or with 2 handlebar adapters (G2). It controls the main electrical functions with push buttons on your motorcycle.
The Electronic box provides the following functions:
An adapter in the handlebar will be connected to the push buttons and a thin single cable connects the adapter to the electronic box. 8 status led, connected to the outputs allow easy installation and control. Most functions can be changed without problems from the user. Just hold the horn button while switching on the 12V and the box is in the program mode after releasing the button. A short flash will indicate this status. You can change the function with pressing the left or right indicator button. You change to the next program mode with an additional press on the horn button. the indicators will flash 2 times in order to show you the status. The following options are possible: most functions can easily be changed by the user. Just hold the horn button while switching on the 12V and the box is in the program mode after releasing the button. A short flash will indicate this status. You can change the function with pressing the left or right indicator button. The indicators will flash 2 times in order to show you the new program option. The following options are possible:
Description:
1 x Show flashes Off On
2 x flasher when switching on
2 x Comfort laser Off On Indicators will switch off after 20 x
3 x Drive light Off On Indicators with 20 % brightness if off
4 x Brake Light Off On Brake light with 50 % brightness if off
5 x Start/Stop buttons 1 Button 2 Button 1 or 2 Button for Start /Stop
6 x Stand/Neutral. Off on Side stand and neutral switch active
The functions are written in the E-Eprom and can be changed anytime. Please note that you need to switch off the box for a minimum of 3 seconds in order to discharge the internal capacitors before you can change the settings again.
Dimensions:
Box: 50 mm x 42 mm x 12 mm
Adapter: 35 mm x 15 mm
Body material:
Polycarbonate, waterproof potted with epoxy resin
Case Color:
Black
Connections:
0,5 mm³ for input, 1 mm³ for power output
Power consumption in operation:
20 mA due to the implemented led
Maximum temperature:
120 degree Celsius
Input voltage range:
6 - 13,8 Volt, temporary up to 20 Volt
Maximum current of the 12V ignition connector:
20 Ampere