U kunt het type schokdemper(s) zo aflezen:

Voorbeeld: MA456-310TR-78-85

• MA456=Type
• 310=Lengte in mm
• 78-85=Jaar van fabricage
• T=Voorbelasting met schroefdraad=voorbelasting op de veer met een schroefring
• R=Rebound=zwarte knop aan de onderzijde=afstelling op de rebound, uitgaande demping. Bij afstelling wordt ook rekening gehouden met de uitgaande demping.
• L=Lengte=niet veel schokdempers worden geleverd met lengte verstelling. Als de L in het artikelnummer staat, dan is dat wel zo.
• C=Compressie=Compressie verstelling op het reservoir
• W=W staat voor dubbele compressie verstelling op het reservoir, Hi en Low speed compressie is instelbaar.
• M=Mono schokdemper

De informatie in de producttitel heeft betrekking op de schokdemper(s) die u krijgt.

LINK [Download/Check documentation]

LINK [Download/Check documentation]

Informatie per model

366 Range Monoshock Topline

Emulsion Mono gas demper, vervaardigd uit hoogwaardig aluminium en voorzien van de nodige afstelmogelijkheden. Instelbare voorbelasting (veervoorspanning), gereedschap inbegrepen. Instelbare rebound door middel van draaiknop aan onderzijde en in lengte verstelbaar +- 5MM.

Information per model

RD222
This is a normal simple hydraulic shock absorber and not a gas assisted one. The standard version comes with a chrome body, matt black coil springs and has 30mm pistons.

- Spring pre-load in steps.
- Available in lengths 270 to 370mm

RE302-T Ecoline
This is a normal simple version of the topline RZ362 shock absorbers and is a Nitro gas assisted shock absorber. The standard version comes with a chrome body, matt black coil springs and has 30mm pistons.

- Spring preload with screw ring, therefore stepless.
- Available in lengths 270 to 420mm

RZ362-TR(L)
Topline shock absorber with a larger damping piston (36mm instead of 30mm) and is a Nitro gas assisted shock absorber. In some cases these shocks are also offered in black by the factory, if so, the price is the same as the aluminium coloured ones.

- Available in lengths 270 to 500mm¬.

RG362-TRCL
Topline shock absorber with a larger damping piston (36mm instead of 30mm) and concerns a Nitro gas assisted shock absorber with separate separate gas reservoirs. In some cases the factory offers these shocks also in black, if so, the price is the same as the aluminium coloured ones.

- Available in lengths 270 to 500mm

RG362-TRWL
Topline shock absorber with a larger damping piston (36mm instead of 30mm) and is a Nitro gas assisted shock absorber with separate separate gas reservoirs which have a Hi / Low speed compression setting. In some cases these shock absorbers are also offered by the factory in black, if so, the price is the same as the aluminum coloured ones.

- Available in lengths 270 to 500mm

366 Range Monoshock Topline
Emulsion Mono gas damper, manufactured from high quality aluminium and equipped with the necessary adjustment possibilities. Pre-load adjustment (spring pre-load), tool included. Adjustable rebound by means of rotary knob at bottom and length-adjustable +- 5MM.

456 Range Monoshock Topline
Self-adjusting Mono gas dampers - 50mm radial billet milled piston - 16mm hardened shaft with low friction – Long-life seal - Pre-load adjustment with open end spanner - Rebound adjustment 60 clicks - Adjustable length (if technically possible) - Damping and spring are model specific